HOSTAFORM C52021 POM  Chemical abbreviation according to ISO 1043-1: POM
Molding compound ISO 9988- POM-K, M-GNR, 06-002

POM copolymer

Extremly easy flowing Injection molding type for very thin-walled
precision molded parts with unfavourite flow-path-wallthickness
relation; permits processing at reduced temperature and also shorter
cycle times; for mechanical lower requirements; good chemical
resistance to solvents, fuel and strong alkalis as well as good
hydrolysis resistance; high esistance to thermal and oxidative
degradation.

Fulfils EG-directive 2002/72/EU as well as the recommendation
XXXIII for consumer goods of the BgVV,
FDA compliant according to 21 CFR 177.2470

UL-registration in natural a thickness more than 0.81 mm, in black a
thickness more than 1.5 mm as UL 94 HB, temperature index UL 746 B
for a thickness of 1.5 mm, electrical 105 °C, mechanical 90 °C

Burning rate ISO 3795 and FMVSS 302 < 75 mm/min for a thickness more
than 1 mm.

Ranges of applications: For very thin-walled precision molded parts
with unfavourite flow-path-wallthickness relation; permits
processing at reduced temperature and also shorter cycle times.

FDA   = Food and Drug Administration (USA)
BgVV  = Bundesinstitut f?r gesundheitlichen Verbraucherschutz und
Veterin rmedizin
FMVSS = Federal Motor Vehicle Safety Standard (USA)
UL    = Underwriters Laboratories (USA)

HOSTAFORM POM 共聚物提供了優(yōu)秀的耐磨性相結(jié)合，長(zhǎng)期疲勞性，韌性與極好的抗潮濕，溶劑和強(qiáng)堿，耐蠕變性。

上一篇：HOSTAFORM C9021

下一篇：HOSTAFORM C36021